Brief introduction to improve the drilling success rate of automatic drilling machine

The automatic drilling machine is a kind of mechanical equipment used for drilling. Compared with other drilling machines, the drill point of the automatic drilling machine is unique. Simply speaking, it is composed of two narrow and long drill point faces. of.

The advantage is that the automatic drilling machine can operate multiple automatic drilling machines at the same time by one person. There is not much improvement in other aspects. Another point is that when the automatic drilling machine is operated, its drilling success rate is also There are some problems,

So in the next time, the editor of Cheng Tianhao will briefly talk about improving the drilling success rate of the automatic drilling machine.

Vertical Tapping Machine Gear type Automatic

Vertical Tapping Machine Gear type Automatic

Automatic drilling machine operation process

1. Set the position of the workpiece clamp. Try to make the center line of the thread in a horizontal or vertical position.

2. The taps and screw holes of the automatic drilling machine should be consistent, and there should be no skew.

3. After the automatic drilling machine starts to work, position the tap as much as possible, and then apply pressure to the tap.

4. In the working process of the automatic drilling machine, once there is a problem, the automatic drilling machine should be stopped in time.

From: http://www.hi-pre.com/maintenance-methods-multi-axis-tapping-machines-2/

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *