The composition, characteristics and advantages of a fully automatic tapping machine

Automatic tapping machine is a professional tapping machine. The equipment has various specifications, such as rotary type, parallel push, double head, multi spindle and other specifications. The tapping efficiency is higher than that of manual manual tapping. Efficiency, stability, and low price are indispensable equipment for every manufacturer that needs to tap. Automatic tapping machine In different applications, the increased tapping rate of the automatic tapping machine means faster welding speed and higher production efficiency.

The composition of the automatic tapping machine:

Head: double or long

Rack: stainless steel frame

Vibrating plate: This is the feeding system and also uses stainless steel

Controller: There are multiple, control vibrating discs, control equipment throughout

Touch screen: 7-inch touch screen, easy to control by manual touch operation

Control box: This control box is equipped with a touch screen

Motor: If the customer has a request, it can be equipped with a servo motor.

Direct vibration: the connection point between the device and the vibration plate, using the vibration feeding

Features of fully automatic tapping machine:

The automatic tapping machine is controlled by PLC and can change the speed of tapping. Since the tapping machine has been facing the market, it has been favored by users because of its advantages of being light, flexible, efficient and irreplaceable by other similar devices. It avoids the limitation of lathe, drilling machine or manual tapping, and saves time, labor, rotten teeth, and taps are not easy to break. Its remarkable characteristics are widely praised and adopted by users. The tapping pusher can be changed in specifications, and the tap can be stopped independently in a single axis. Propulsion with a buffered cylinder (compressed air). If any changes are found during the tapping process, the single axis will automatically stop and sound alarm.

Automatic tapping machine can tap a variety of workpieces, such as flange flanges or flanges, nuts, die castings, stampings, hardware, iron pieces, etc. If you need to send the workpiece Give us a hand, we will tailor a tailoring equipment to meet your requirements.

Advantages of fully automatic tapping machine:

The device is a component with a tapping hole or a tapping hole machine on the end face of the machine, also called a flange flange plate or a flange disk. The machining of the internal thread and the screw is performed on the inner side surface of the hole. device. Automatic tapping machine Simple automatic tapping machine integrated cold wire technology concept uses the excess heat generated in the welding process to melt the non-welding electrode – integrated cold wire. Increase productivity, the same energy input increases the deposition rate by 50%. Compared with the manual tapping machine, the automatic tapping machine can automatically feed when the workpiece blank is poured into the vibrating plate, automatic clamping, automatic positioning, automatic tapping, automatic unloading, high production efficiency. An employee can jointly control 4 to 5 machines, saving employees’ wages and achieving stable efficiency.

The automatic tapping equipment is fast and accurate, and the tapped teeth can be detected by the tooth gauge. Since the tapping machine has been facing the market, it has been favored by users because of its advantages of being light, flexible, efficient and irreplaceable by other similar devices. It avoids the limitation of lathe, drilling machine or manual tapping, and saves time, labor, rotten teeth, and taps are not easy to break. Its remarkable characteristics are widely praised and adopted by users. It can be used for high-speed continuous cycle operation. Especially the motor and engine can be used for a long time. It can be activated, and one person can operate multiple devices together, which can obviously save labor costs.

The automatic tapping machine has high speed and high precision; forward rotation~reverse forward rotation~reverse rotation…..continuous, one-way, and cycle can be automatic, the operation controller does not need to touch the machine at all, and can completely be separated. The machine completes the automatic operation; the high-precision tapping stroke adjustment is simple, the automatic rotary machine can adjust the tapping process freely, the spindle can be actively stopped, the straightness is stable, accurate, and the precision is particularly high. When the tapping and tapping, the travel and retreat are not required. Can work at ease. Automatic tapping machine Simple automatic tapping machine integrated cold wire technology concept uses the excess heat generated in the welding process to melt the non-welding electrode – integrated cold wire. Increase productivity, the same energy input increases the deposition rate by 50%. Therefore, if the company needs to tap, tap and produce a large amount of products, it can fully consider the automatic tapping machine equipment.

More details please contact us at sale@hi-pre.com .

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *